Kare Prosthetics and orthotics faqs

Prosthetics

When should I add socks?

With competitive price and timely delivery, Wonderfu sincerely hope to be your supplier and partner.

Socks are needed when your residual limb changes volume. Here are some signs that indicated socks are needed:

• Socket feels loose
• Pain on bottom of residual limb
• Socket spins when walking

How do I care for my liner? How do I keep them from smelling?

Gel liners need to be cleaned after each use. Luke warm water with a mild soap is recommended. Allow the liner to air dry. Putting the liner in the dryer will damage it. It is also recommended that once a week you wipe down the inside of the liner with rubbing alcohol. Sticking to a daily cleaning routine will cut down the amount of odor from your liner. Please see this link for additional information and tips.

Can I wear my prostheses in the shower?

Most prostheses, uncovered, should not be worn in the shower. The water will rust the metal components and screws. There are special prosthesis which can be made for showering and swimming purposes.

How long will this prosthesis last? How long will my liners last?

A prosthesis can last for several years. The length of time depends on the amount of time the patient wears the prosthesis and what type of activities it is used for. Prostheses are designed to be very strong and durable. However, it is a good idea to have your prosthesis checked out every 12 months to make sure it is in good working order. Liners will usually start to wear out in about 6 months. But they can last up to 12 months or longer. Just like the prosthesis, the longevity of the liner depends on amount of usage.

Can I wear my leg to bed?Can I wear my leg to bed?

It is not recommended that you wear your prosthesis to bed. Wearing the prosthesis for an excessive amount of time will most likely cause harm to your residual limb.

What do I do if I get stuck in my leg?

Remain calm and contact the office or your Prosthetist immediately.

What do I do if I get a sore on my residual limb?

Discontinue use of your prosthesis immediately or limit the amount of time you wear it drastically. Contact the office or your Prosthetist as soon as possible.

How long will it take to get my Prosthesis?

The manufacturing and fitting of your prosthesis will take a few weeks. It takes an average of 3 or 4 visits with your Prosthetist to get the right fit. We understand that you are anxious to return to activities of daily living on your new prosthesis, so we do our best to deliver your prosthesis in a timely fashion.

What will my Prosthesis look like?

Every prosthesis is custom molded to every individual. There is a socket that fits on your residual limb. The componentry, i.e the knee and/or foot, are connect to the bottom of the socket. There is the option of cosmetically covering the prosthesis after the fitting process is completed. The cosmetic cover will cover all of the metal componentry, making the prosthesis look more like your other leg.

When can I be fit with a prosthesis?

The fitting process can begin after your stitches or staples have been removed and you are fully healed. It is also recommended that some of the swelling has decreased before you are cast for your first socket.

Will I be able to do the things I did before I got the amputation?

The majority of people with amputations are able to return to the activities they were doing before the amputation. During your initial evaluation, your prosthetist will ask for your personal goals so they can make a prosthesis to help you achieve them.

How do I learn to use my prosthesis?

Once you are fit with your prosthesis, we provide training in our world class gait room. We will work with you on how to use your prosthesis as well as learn to walk with it.

What happens after I am fit with my final prosthesis?

Your prosthetist will continue to follow-up with you every 3-6 months to see how you are doing or if you need any new supplies. If at any point you have any questions or concerns you are encouraged to call us at + .

How much will my lower limb prosthesis weigh?

The weight of your prosthetic leg will depend on the type of prosthesis it is and its components. An average below knee prosthesis will weigh around 4 pounds and an average above knee prosthesis will weigh around 8-10 pounds. Your prosthetic leg often weigh less than what your anatomical leg did.

(can be split into two 60-minute sessions)

Note that not all lessons and activities will exist under a unit, and instead may exist as "standalone" curriculum.

Units serve as guides to a particular content or subject area. Nested under units are lessons (in purple) and hands-on activities (in blue).

Associated Informal Learning Activity indicates that an abbreviated version of this activity is available. These 60-minutes-or-less, easy-to-prep &#;taste of engineering&#; activities are intended for informal learning settings.

(can be split into two 60-minute sessions)

Summary

Student teams investigate biomedical engineering and the technology of prosthetics. Students create lower-leg prosthetic prototypes using various ordinary materials. Each team demonstrate its device's strength and consider its pros and cons, giving insight into the characteristics and materials biomedical engineers consider in designing artificial limbs.

This engineering curriculum aligns to Next Generation Science Standards ( NGSS ).

Students design and create prosthetic legs

Engineering Connection

For one reason or another, many people require replacement body parts. Those who need artificial legs must have a structurally stable one to replace a critical part of the skeletal system. One specialty of biomedical engineering is designing and creating new and better prostheses (replacement body parts). Biomedical engineers are continually improving the strength, durability, longevity and lifelikeness so amputees can lead full lives.

Learning Objectives

After this activity, students should be able to:

• Describe the engineering design considerations that go into developing quality prostheses.
• List characteristics and features that are important for a prosthetic leg.
• Analyze a prototype prosthetic leg and make suggestions for design improvements.

Materials List

Each group needs:

• yardstick, ruler or tape measure, for measuring
• scissors
• 1 type of prosthetic structural material with which to create a prototype (see suggestions below); note: the number of groups depends on how many different prosthetic resource materials are collected
• Prosthetic Party Worksheet, one per person

For the entire class to share:

• 1 roll duct tape

Provide a variety of prosthesis structural material resources. Suggestions:

• For leg structure: toilet plungers (unused), plastic pipes, metal pipes, metal strips, cardboard tube (from wrapping paper roll), wooden "2 x 4," thin metal duct material (to be rolled and taped into a tube shape), all generally 1.5 ft (or .46 m) long
• For comfort: large sponges, scrap bubble wrap, scrap cardboard, etc.
• For lifelikeness: bath towels, pairs of pants, shoes (use students')
• For body attachment: string, rope, twine (about 30 ft [or 10 m])

Pre-Req Knowledge

Familiarity with the idea of bones providing a body's structure, as described in the Engineering Bones lesson.

Introduction/Motivation

What is a prosthesis? (Answer: An artificial body part that replaces a missing body part.) Who might need a prosthesis? Many people are in need of various types of prostheses, including injured soldiers, people who live in war zones, and people who have been in accidents. Biomedical engineers design prostheses for these amputees so that they can live as easily as others.

A student-made prosthetic lower leg.copyright

Copyright © Megan Podlogar, ITL Program, College of Engineering, University of Colorado Boulder

The company is the world’s best lower limb prosthesis for sale supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

What are some important features required for a good prosthetic leg? The most important characteristics are strength, durability, longevity, shock absorption, lifelikeness and comfort. Biomedical engineers research and design new ways to create prosthetic legs that have all of these characteristics.

Today, we will be biomedical engineers, and design and create our own prosthetic lower legs! Then we will test our prototypes by bending a knee and resting it on the prosthesis. Our goal is to provide all the important features that we talked about. Then, we'll figure out some way to connect our prostheses to a body. Since we do not have real manufacturing equipment, we will use some everyday, around-the-house materials.

Procedure

Before the Activity

• Gather materials and make copies of the Prosthetic Party Worksheet, one per person.
• Review the attached, three-page Images of Example Prototype Prostheses, for how students might create their own prostheses, and ideas to address comfort and lifelikeness.

With the Students

1. Divide the class into enough teams so each has a different structural prosthetic material.
2. Lead a pre-activity discussion and brainstorming session (as described in the Assessment section) so students have a good understanding of the various prosthetic requirements and material resources to meet these needs.
3. Explain to the students that when engineers design a new or improved product, they work in groups and follow the steps of the engineering design process: 1) understand the problem or need, 2) come up with creative ideas, 3) select the most promising idea, 4) communicate and make a plan to describe the idea, 5) create or build a prototype or model of the design, and 6) evaluate what you have made.
4. Assign teams different material resources with which to construct their prostheses. Make available other materials for the students to consider incorporating into their design.
5. Hand out worksheets and have students follow along with its questions throughout the activity.
6. Have students discuss ideas within their groups, while completing the first page of the worksheet.
7. Have each group choose one teammate for whom to make the prosthesis. So that the prosthesis fits him/her, measure that student's lower leg from where it bends at the knee.

Students design and create their own prosthetic lower legs, choosing and combining materials to achieve structural, stability, comfort and lifelikeness requirements.copyright

Copyright © Megan Podlogar, ITL Program, College of Engineering, University of Colorado Boulder

8. Have students collect other materials, such as tape and string, and begin creating their prototypes, creatively addressing the requirements of strength, stability, durability, longevity, shock absorption, lifelikeness, comfort, etc.

Get creative to find ways to make your prosthesis comfortable and lifelike.copyright

Copyright © Megan Podlogar, ITL Program, College of Engineering, University of Colorado Boulder

9. After all teams are finished, have each group present its prosthesis to the rest of the class, explaining the design concepts and material choices, as well as demonstrating the prototype's strength by having the teammate use it to walk (while bending his/her knee and wearing the prosthesis). See post-activity presentation suggestions in the Assessment section.
10. Conclude with a class discussion using the questions provided in the Assessment section.

Vocabulary/Definitions

amputee: A person who has had a limb removed.

bioengineering: The use of artificial tissues, organs or organ components to replace damaged or absent parts of the body, such as artificial limbs and heart pacemakers. Source: The Oxford Pocket Dictionary of Current English, http://encyclopedia.com/doc/1O999-bioengineering.html

biomedical engineer: An occupation that includes designing artificial body parts.

engineer: A person who applies his/her understanding of science and math to creating things for the benefit of humanity and our world.

prosthesis: An artificial body part to replace a missing one. Plural: prostheses.

prosthetics: A specialty of medicine and engineering that designs, constructs and fits artificial limbs and body parts (prostheses).

prototype: An original, full-scale and usually working model of a new product, or new version of an existing product. Source: American Heritage Dictionary: http://dictionary.reference.com/browse/Prototype

Assessment

Pre-Activity Assessment

Discussion/Brainstorming: As a class, have students engage in open discussion. Solicit, integrate and summarize student responses. Give prompts as necessary. Remind students that in brainstorming, no idea or suggestion is "silly." All ideas should be respectfully heard. Take an uncritical position, encourage wild ideas and discourage criticism of ideas. Have students raise their hands to respond. Record their ideas on the board. Ask the students:

• What features would make a useful prosthetic lower leg? (Possible answers: Strength, stability, durability, longevity, shock absorption, lifelikeness, comfort.)
• How can you achieve some of these qualities, using the provided resources? (Possible answers: Use the plunger head for a comfortable knee support, use rope or duct tape for connection to the body, use tube or pipe or wood for strong and sturdy support.)

Activity Embedded Assessment

Worksheet: Have students complete the activity worksheet; review their answers to gauge their mastery of the subject.

Post-Activity Assessment

Conference Presentation: Have each group present their prosthetic lower leg as if they were presenting it at an engineering conference. Have them include the following in their presentations:

• List of materials and purpose of each
• How they came up with the design
• Important design features
• Estimated cost
• Demonstration of use

Concluding Discussion Questions: Conclude with a class discussion to gauge students' comprehension of the subject matter covered. Ask the students:

• What improvements would you make to your prototype prosthesis?
• What other materials and fasteners would help improve your design?
• What would be different if you had to make the whole leg, including the knee?
• What design constraints or limitations might be different for biomedical engineers developing real prostheses?

Safety Issues

Be careful when testing prostheses. Have student "spotters" positioned around the teammate who is testing the prosthesis to catch him/her if s/he falls.

Troubleshooting Tips

If the prostheses are not strong enough to hold the body weight, test them with heavy objects (such as books) while students hold the prosthetic steady.

Since students may be unable to cut certain materials to the correct length, advise groups with these materials to choose their "amputee" teammate by finding the person who has a lower leg length closest to the material length. Or, if the material is too long, they could adjust by elevating the opposite foot (perhaps by standing on a book or strapping an object to the foot). Engineers realize that all materials have pros and cons; if a material is difficult to work with, it is a disadvantage to ultimately choosing it to make prostheses.

Activity Extensions

Expand the design challenge to have teams make a functional prosthetic arm. For an artificial arm, the primary purpose shifts from being structural to enabling movement. Have students brainstorm ways to make the prosthetic arm move. A bonus challenge is to create a prosthetic arm and/or hand that can pick up an object.

See if your local hospital, rehab center, veteran's hospital or medical center can loan you real prosthestic devices to show students. Or, find images of the latest designs on the Internet.

Have students research gait analysis and how engineers help measure a person's gait. How would this analysis be helpful in designing prosthetic limbs?

Activity Scaling

• For lower grades, instead of testing the device with the weight of an entire body, test it with heavy objects (such as books) while students hold the prototype steady. This way, the prosthetic need not be as strong or dependant on a secure leg attachment.
• For upper grades, have students draw more than one design. Have them predict and explain why one of their designs would be best, and construct a prototype of that one.

Additional Multimedia Support

As featured in Copper-Hewitt National Design Museum's Design for the Other 90% exhibit (http://archive.cooperhewitt.org/other90/other90.cooperhewitt.org/Design/jaipur-foot-and-below-knee-prosthesis.html), have students investigate the Jaipur prosthesis at http://jaipurfoot.org/.

More Curriculum Like This

Middle School

Lesson

Engineering Bones

Students extend their knowledge of the skeletal system to biomedical engineering design, specifically the concept of artificial limbs and joints. Students relate the skeleton as a structural system, focusing on the leg as structural necessity. They learn about the design considerations involved in t...

Engineering Bones

High School

Lesson

The Pirates of Prosthetics: Peg Legs and Hooks

Students are introduced to prosthetics&#;history, purpose and benefits, main components, main types, materials, control methods, modern examples&#;including modern materials used to make replacement body parts and the engineering design considerations to develop prostheses. They learn how engineers and ...

The Pirates of Prosthetics: Peg Legs and Hooks

Middle School

Informal Learning Activity

Prosthetic Party: Making New Legs

Students design, build and test prosthetic legs.

Prosthetic Party: Making New Legs

References

The American Heritage® Dictionary of the English Language, Fourth Edition. Accessed October 9, . Dictionary.com. http://dictionary.reference.com/browse/prototype

Copyright

© by Regents of the University of Colorado

Contributors

Megan Podlogar; Malinda Schaefer Zarske; Denise W. Carlson

Supporting Program

Integrated Teaching and Learning Program, College of Engineering, University of Colorado Boulder

Acknowledgements

The contents of this digital library curriculum were developed under grants from the Fund for the Improvement of Postsecondary Education (FIPSE), U.S. Department of Education and National Science Foundation (GK-12 grant no. ). However, these contents do not necessarily represent the policies of the DOE or NSF, and you should not assume endorsement by the federal government.

Last modified: October 9,

Want more information on Prosthetic Parts Manufacturer? Feel free to contact us.