Goto OSi Silicone to know more.
Nedform Silicone Oil
Silicone oil is made from silicon. Nedform silicone oil can be used for countless purposes.
&#; minimal change in physical properties over a wide temperature range
&#; excellent water-repellent properties
&#; good dielectric properties
&#; low surface tension and therefore high surface activity chemically very non-reactive
&#; low pour point
&#; good solubility in a wide range of solvents
This silicone oil can be used in all pourable silicone in this webshop.
This highly liquid silicone oil 350 cSt. can be added to pourable silicone so that it will be softer and more flexible. By adding the oil, the silicone will also be more fluid and after curing it will be more elastic. The oil can also be used to manually smooth out thickened silicone that has been brushed onto a surface.
This silicon oil is suitable to be used in products that may come in contact with food or beverages according to FDA 21 CFR Par177.
Technical data
Processing
Take the desired amount of the silicone A component and add the appropriate amount of B-component (shown in the data sheet of your silicone). Stir the mixture well. Add the silicone oil to the silicone mixture. By varying between 1% and 15% (weight) oil, you can decide how much softer / flexible the end result will be.
Adding 8% oil is seen by many people to be an adequate reduction of the hardness (about 3-5 shore points) and is recommended. Adding more than 10% of the oil can have unacceptable impact on the final strength of the cured silicone and is therefore not recommended.
You can also add the silicone oil with the aim of making the silicon more liquid. This will make the silicone fluid better self deaerating. In this case too we do not recommend to add more than 10%.
Special instructions
The addition of silicone oil is a form of adjusting your silicones. You should be aware that the final values, will differ from the values indicated on the data sheets of the silicone.
Oil does not actively participate in the silicone network. This means it will be able to migrate out of the silicone over many years. This proces is sped up when the silicone are under pressure or bend. This will result in a greasy layer on the silicone surface and possible shrinkage of the rubber.
Packing
For more information, please visit Silicone Oil Wholesale.
The silicone oil 350 cSt comes in a bottle (1 kg) or keg (5 kg) or a can of 25 Kg. 200 Kg Barrels and 950 KG bulk containers are also possible.
Shelf life
At least 5 years.
Product information
EN - Product information Nedform Silicone oil.pdf
EN - Product information Nedform Silicone Oils.pdf
SDS Silicone Oil 350 cSt Nedform EN.pdf
Widely used in temperature control and pressure control instruments and gauges that must operate in harsh environments of Oil & Gas and Subsea.
PSF&#;Fluids are 100% PDMS Silicone Oil that contain no solvents or distillates. They are compatible with virtually all O&#;rings, gaskets, valves, pumps, cables and seals
Synonyms: low viscosity linear PDMS fluid, low viscosity PDMS Silicone oil, low viscosity silicone oils, low viscosity polydimethylsiloxane, low viscosity polydimethylsiloxanes, low viscosity PDMS, PDMS Silicone Oil, PDMS low viscosity, low viscosity CAS# &#;62&#; 9, CAS No &#;62&#;9, PDMS Silicone Oil, low surface tension silicone, low temperature silicone, low flash point silicone oil, , low viscosity linear polydimethylsiloxane, low viscosity linear PDMS oil, low RI PDMS Silicone Oil, RI Matching Silicone Oil, Refractive Index matching Silicone Oil, silicone for thin film coatings, Silicone Fluid for touch screen technology, Silicone Oil for Laboratory research, PDMS Silicone oil for Oil & Gas Exploration, silicone oil for Aviation, silicone oil for Aerospace, PDMS Silicone oil Renewable Energies, PDMS Silicone for Turbine Technology, PDMS Silicone for Wind Power Technology, PDMS Silicone for Temperature Control Technologies, PDMS Silicone oil Geothermal, PDMS Silicone Oil Solar Industry, Sensor Technology, Geosciences, PDMS Fluids for Electronics, PDMS Silicone Lubricant, PDMS Silicone Lubricants, Low viscosity silicone hydraulic fluid, PDMS silicone oil for thin film coatings
PSF Silicone Fluids are used in a wide range of Flow Control, Temperature Control, Pressure Control & Vibration Control Technologies
Contact us to discuss your requirements of Silicone Oil Factory. Our experienced sales team can help you identify the options that best suit your needs.