These use points of multi-functional electric medical bed must be kept in mind!

Multi-functional electric medical bed due to the addition of a lot of ordinary medical bed does not have the use of functions, so it is more and more favored by the family and medical industry. At the same time, it is precisely because of the existence of these special functions that it is very different from the use of ordinary medical beds. In view of this, today, the Xiaobian of Kangshen Medical will focus on several points that should be paid special attention to when using a multi-functional electric medical bed, hoping to help you. 

1. Check the power cord of the electric nursing bed for damage, it may be crushed, squeezed, cut, cut or worn through. Do not place furniture (such as rocking chairs) on wires. Avoid cord placement or rolling beds.

2. Do not allow clothing, sheets, bedding, books or any other electrical outlet in the wall to come into contact. Do not allow these items to get stuck between the wire and socket on the bed when plugged in this could cause fire or damage to the cord or plug.

3. Do not place a rug or rug over the cord, bed, or anything else. Carpets and rugs can cause wires to heat up too much and cause a fire. Do not place the power cord in the person's position, as this may cause falls and damage to the power cord.

4. Do not use an extension cord or power strip with more than one plug in the socket. These cause any damage that may lead to a fire. If an extension cord or power cord must be used, have a professional check before use. It will also need to be checked regularly for as long as you use it. Avoid using socket boxes where more than one power cord may be plugged in. If you must use an outlet box, leave it there without the risk of damage or leaking liquid.

5. Plug in the power cord from the bed directly into the wall outlet. Have a professional check to see if it is working properly on the power outlet. The socket should also be checked to make sure it is the correct type for the wire. Pins (blades) should be tight. To the power outlet, the power cord should be tightly fitted. Plugs, receptacles and wainscoting should not insert or crack.

6. When adjusting the head, feet or any part of the bed, the bed is free to move. It should be extended to its full length and adjusted to any position. Make sure that bed movements do not affect the bed's power cord, plug or socket. Manual controls and power cords should not pass through bed moving parts, or through bed tracks. You adjust the bed and watch the hand control cables and power cords. Normal bed exercise should not pinch or damage these lines.